Advertising Disclosure
10 Best replacement sensors in Canada
Best Choice01RobinairRobinair 16916 Replacement Sensor
Free ShippingMain highlights- Replacement oxygen sensor for Robinair R-1234yf machines and refrigerant identifiers.
- Replacement filter for: AC1234-4 / AC1234-4SL / AC1234-4-230 / AC1234-6 / AC1234-9
- 16990/16995 Refrigerant identifier
9.8Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02Rheem
Rheem SP20172 Flammable Vapor FV Sensor Kit
Free ShippingMain highlights- This product replaces the AP13447-3 (this kit includes this sensor)
- Rheem/Ruud replacement FV sensor kit.
- Includes: FV Sensor (AP13447-3), Cap Plug (AP13450-3), and 6" Wire Tie.
- HVAC replacement part Rheem SP20172.
9.6Exceptional
Show more
- 03LAWOHO
Garage Door Opener Safety Sensor Kit Replacement for 41A5034 Liftmaster Chamberlain Sears Craftsman Garage Door Sensor (1997 - Current)
Free ShippingMain highlights- Working Mode: The sending sensor (with an amber LED) will transmits an invisible light beam to the receiving sensor (with a green LED) when the sensors detect an obstruction, then the door will automatically stops closing and reverses direction.
- Warm Tips: 1. Be sure disconnect power from garage door openers BEFORE installing the safety reversing sensor. 2. The safety reversing sensor beam must install NO HIGHER than 6°(15 cm) above garage floor.
- Replacement Models: 2610459, 012381050345, 41A5034 | LiftMaster : 985, 1265, 1345, 1346, 1355, 2110, 2220, 2245, 2255, 2265, 3110, 3130, 3220, 3240, 3245, 1000SDR, 1240R, 1280R, 2000SDR, 2500B, 2500B, 2500D, 3130M, 3240M, 3245M, 3575S, 3585S, 3595S, 3800P, 3800PLD, ATS2113X0 (not all models listed). | Chamberlain: 1200, 2200, 4200, 4620, 4640, 6200, 7220.
- Important Note: Your garage door openers must have black brackets & safety sensor that clip onto the garage door track. And this Safety Sensor is NOT a replacement for 041A4373A Safety Sensors, and does not support models manufactured before 1997.
- Compatibility: This 41A5034 safety sensor replacement for only made after 1997 to Current Liftmaster | Chamberlain | Sears Chamberlain | Wayne Dalton garage door openers that need to replace fail safe units (equipped with infrared eye beam)
9.4Excellent
Show more
- 04Vkinman
Vkinman 2Pcs 4670A576 ABS Speed Sensor Front Left and Right Side, ABS Wheel Speed Sensor Driver and Passenger Side ABS Wheel Speed Sensor 5S11130 5S11131 Replacement for Mitsubishi Lancer Outlander
Free ShippingMain highlights- Replace Part Number: 81-6991, 81-6990, 5S11131, 5S11130, 4670A824, 4670A823, 4670A646, 4670A645, 4670A576, 4670A575, 4670A032, 4670A031.
- Reliable Material: Constructed from reliable plastic, rubber and metal materials, the ABS Wheel Speed Sensor offers both longevity and stability, ensuring reliability over time.
- Package Included: 2 x 4670A576 ABS Speed Sensor.
- Function: ABS Speed Sensors on the front left and right sides are essential components of the ABS system that contribute significantly to vehicle safety, stability, and overall performance.
- Fitment: Replacement for Mitsubishi Lancer 2006-2017, for Outlander 2006-2017, for Outlander Sport 2011-2020, for RVR 2011-2020.
9.3Excellent
Show more
Value for Money05HUIAWAYUniversal 41A5034 Garage Door Sensor Replacement Kit with 2 Mounting Brackets for Chamberlain & for Liftmaster & for Sears & for Craftsman Garage Door 1997-2022
Free ShippingMain highlights- 【Universal Compatibility】Our garage door sensor replacement kit is for 41A5034 craftsman Chamberlain Liftmaster 1997-Current. Our 41A5034 garage door opener safety beam kit can replace: G801CB-P, 2610459, 012381050345, 041A5034.
- 【Enhanced Safety Features】Our smart garage door sensor emits invisible rays, triggering automatic reversal upon detecting obstacles, preventing accidents and property damage. Ensure peace of mind with reliable sensor technology.
- 【Easy Installation】Our garage door sensor replacement kit, including mounting brackets and detailed instructions, simplifies setup in minutes.
- 【Durable Materials】Crafted from durable materials, our garage door sensors are built to last. Protect your family and property with dependable garage door sensor performance.
- 【Comprehensive Package】Our sensor kit includes everything you need for installation: mounting brackets, wire connectors, wing nuts, and screws.
9.0Excellent
Show more
- 06Dzpuhuojz
Safety Sensor Beam Eyes Compatible with Liftmaster Sears Chamberlain Craftsman 41A5034 G801CB-P Garage Door Opener with Brackets
Free ShippingMain highlights- Universal Compatibility: Our product is a safety sensor replacement kit, which is compatible with all garage door openers manufactured by Liftmaster/Sears/Chamberlain/Craftsman after 1997.
- Safer Design: This 41A5034 safety sensor emits an invisible beam of light inside of the garage door, whenever there is an obstacle, the garage door will automatically reverse before causing any damage to prevent accidents.
- Package Included: 1*detailed installation instructions, 1*sending sensor with a yellow light, 1*receiving sensor with a green light, 5*wire connectors, 2*wing nuts, 2*mounting screws and 2*mounting brackets.
- Notes: Your garage opener must be equipped with a safety sensor. If not, installing this attachment will not add the feature. Please confirm the power is NOT connected to the garage door opener before installing the safety reversing sensor.
- Easy to Install: This garage door opener safety beam kit can replace: G801CB-P, 2610459, 012381050345, 041A5034. A detailed user manual is included to help you get set up and install in minutes.
8.8Very Good
Show more
- 07NUOM
10PCS Replacement Trimmer Potentiometer Sensor Compatible with Xbox One PS3 PS4 Controllers Gasket Repair Parts for Thumb Stick Analog Joystick
Free ShippingMain highlights- POTENTIOMETER PARAMETER: 10K ohm. The Trimmer Potentiometer has 3 Pin connector. De-soldering the unit with only 3 prongs will be much more easier than replacing the 14 Pin joystick assembly.
- PERFECT REPLACEMENT: A good replacement for your damaged or non-working 3d joystick axis analog sensor module.
- NOTICE: 1. We cannot guarantee its compatibility with other controllers. Check the size and make sure it is around 10K ohm; 2. It will solve the problems caused by the 3 Pin sensor only. Make sure this point before ordering.
- EASY TO INSTALL: Very easy to install these trimmer potentiometer sensor. Just need an electronics solder iron and small gauge solder, you will complete the potentiometer replacement. Remember to clean the old hole before re-soldering the new trimmer potentiometer Sensor.
- COMPATIBILITY: Compatible with Xbox One series and PS3, PS4 controllers ONLY; Great controller replacements and gasket repair parts for thumb stick analog joystick.
8.5Good
Show more
- 08EMUKOEP
Dehumidifier Humidity Sensor PC Dehumidifier Replacement Humidity Sensor Part for 50 70 Pints Model
Main highlights- Replacement for Extended Lifespan: The sensor is easy to replace, effectively prolonging the life of your dehumidifier and contributing to a consistently comfortable indoor environment.
- Precise Compatibility: Specifically designed for 50 and 70 pint dehumidifiers, this humidity sensor ensures seamless compatibility with your device for optimal performance.
- PC Material: Constructed from premium PC material, the humidity sensor module offers stable performance and is not prone to damage, ensuring a long lasting operational life.
- Easy Installation: The dehumidifier humidity sensor is easy to install and disassemble, simply remove old parts and put this new one in its place, convenient for maintenance.
- Dependable Humidity Monitoring: Accurately detects humidity levels in the wind, delivering dependable readings to enhance the dehumidification efficiency and maintain optimal indoor comfort.
8.4Good
Show more
- 09Wholesale Sensors
Wholesale Sensors Replacement for Frigidaire 316490000 Oven Probe Temperature Sensor 12 Month Warranty
Free ShippingMain highlights- Replacement for Frigidaire 316490000 Oven Probe Temperature Sensor, Also replaces 1197392,AH1528542,AP3963654 PS1528542 EAP1528542,316490002,316490003,7316490000.
- Ensure your recipes turn out perfectly with precise temperature readings, helping you bake and roast with confidence.
- Crafted to withstand high temperatures and daily use, this sensor is built to last.
- Compatible with the following models, included but not limited to: Frigidaire FFEF3052TS Frigidaire FGEF3036TF Frigidaire LFEF3054TF Frigidaire FGEF3059TF Frigidaire LFEF3018TWA
- 12-Month Warranty by Wholesale Sensors, a USA Manufacturer: Rest easy knowing your purchase is protected by our 12-month warranty. Wholesale Sensors, a trusted USA manufacturer, takes full responsibility for ensuring the quality and performance of our product, offering you added peace of mind with every purchase.
8.2Good
Show more
- 10Auto_plaza
40pcs Trimmer Potentiometer Sensor Replacement Trim-Pot Gasket Thumb Stick Analog Joystick Repair Parts (Compatible for PS5, 2.3k Ohm)
Free ShippingMain highlights- Used to repair damaged game controllers.
- To remove the circuit board, open the potentiometer on the game controller and replace the old sensor directly.
- The resistance value is 2.3k ohms.
- Compatible with PS5.
- 1 package 40X, without instruction manual, please confirm the required model before purchasing.
8.0Good
Show more
